| Basic information | |||||||||||||||
Capacity: 300-600kg/h
|
SJZ92/188 Conical Twin-screw Extruder
| Screw diameter: Ф92/188mm |
| PVC powder special designed for screw with rotation speed of 1 ~ 34.7 r/min |
| Screw material: 38CrMoAlA, nitrogen treatment, with the thickness: 0.5~0.7mm, hardness: HV740~940. |
| Barrel material: 38CrMoAlA, nitrogen treatment, with the thickness: 0.6~0.7mm, hardness ≥HV940~1100. |
| Heating unit: cast aluminum heater + stainless steel covering + cooling fan
（the forth zone cooling by water） |
| Heating zone quantity: 5 with total power 54kw Temperature range: 50~300℃ |
| Cooling fan power:4 х 0.55KW |
| Screw& Barrel bi-metal treatment |
Dosing feeding System
| Adopter twin screw feeder With stainless steel hopper |
| Feeding motor power: 1.5KW, 3 phase asynchronous motor |
| Controlled by Imported brand AC frequency converter |
| Transmission system | ||||||
| horizontal structure | ||||||
| High torque output | ||||||
NSK Thrust bearing
|
||||||
| Main motor system | |
| Motor: Brook Crompton wolon or SIEMENS BEIDE AC motor other, 110kw | |
| Main motor adjustment: by AC with imported ABB other brand | |
| Outer size:6100 × 1800 × 2700mm | |
| Center height: 1150mm | |
| Weight of extruder: 9000kg | |
| Electric control system | |
| Optimized designed electric controlling cabinet-Meter controller from Japanese brand
Pressure sensor installed on the joint core of die head Grade of thermos-couple: Grade A AC inventor: ABB brand Stopping device and alarming device Circuit breaker: ABB/SCHNEIDER Relay: SCHNEIDER/OMRON Contactor: SCHNEIDER Air switch: CHNT/SCHNEIDER |
|
| Prepare 5 heating zones for die | |
| PID Temperature control | |
| Emergency stop devices and alarm systems | |
| Alarm system detection range | |
| Over current protection alarm function | |
| Screw loose off parking automatic alarm function | |
Vacuum calibration table
| Vacuum pump：11KW*2sets ，7.5KW*2 sets vacuum pump |
| Water pump ：7.5KW*1sets 2.2KW*1sets |
| Stainless steel：Tank material |
| Length：6000mm |
| width：2100mm |
| The center distance of aluminum guide rail ：1300mm |
| Vacuum degree：0 -0.09 Mpa |
| Brand：Schneider and CHNT |
| Number of vacuum nozzles :120 |
| Number of faucets :120 |
| The position and method of the air and water nozzle joints:
The air nozzle is above the fuselage, and the water nozzle is on the square tube bracket of the sink |
| Air blower: Used to dry the surface water spots of products |
| The front and rear moving device :
Be connected by a screw rod. The power of the screw reduction motor is 0.75KW. |
| Adjustment of the upper and lower positions:
Electric lifting |
| Adjustment in other two directions:
Can be adjusted manually |
Haul off Unit
| Caterpillar: 2pcs |
| Clamping form :Pneumatic clamping |
| Effective track length:3000mm |
| Effective track width:1000mm |
| Motor power:4KW*2 sets |
| Traction speed:0.5—2m/min |
| Working pressure of pneumatic components:0.5~0.7 Mpa |
Dust free cutter
| Mode：Manual cutting and automatic cutting modes. |
| Workbench displacement mode：Controlled by the cylinder. |
| Max：1000mm/50mm |
| Cutting accuracy ：≤5mm |
| Cutting motor power：3KW |
| PLC：CTS PLC |
| Material：High quality alloy steel |
| Diameter：400mm |
| Working pressure：0.5~0.7 Mpa |
| Motor of dust collector: 2.2KW x 1 |
Mechanical arm
Available for 1220×2500mm board
Reviews
There are no reviews yet.