WPC Laminating Machine

Overall dimensions: 4000*1650*880mm Power: 6KW

1. The conveying frame is made by laser cutting and drilling, and Q235A sheet metal is numerically controlled bending with small error and smooth transmission. The structure is firm and reliable, and the surface is sprayed and painted.

2. The conveying rollers use 12 Φ80 single-sided 3mm thick precision drawn tubes with small runout. The conveying is smooth, the surface is galvanized, and it is stable and durable.

3. The roller length is 1350mm. It adopts chain transmission, which is smooth, has little vibration, and has a long service life.

4. The conveying rollers are arranged in an inclined manner. During the conveying process, the sheet always leans against the guide plate, until the plates are all on a straight line, effectively preventing the displacement of the sheets during the conveying process.

5. Heating uses infrared lamp tubes. The heating speed is fast, and it is equipped with a material incoming detection switch, which can effectively save electricity.

Maximum transportation width: 650mm

Maximum transportation length: 2500mm

Working height: 850mm

Overall dimensions: 3000*900*880mm

1. The conveyor frame is laser-cut and punched, and Q235A sheet metal is numerically controlled bent. The error is small and the transmission is smooth. The structure is firm and reliable, and the surface is sprayed and painted.

2. The conveying rollers use 12 Φ80 single-sided 3mm thick precision drawn tubes with small runout. The conveying is smooth, the surface is galvanized, and it is stable and durable.

3. The roller body length is 700mm. It adopts chain transmission, which is smooth, has little vibration, and has a long service life.

4. The conveying rollers are arranged in an inclined manner. During the conveying process, the sheet always leans against the guide plate, and until the finished sheet is all on a straight line, it effectively prevents the sheet from shifting during the conveying process.

Machine working pressure: 70 bar

Total power: ≥28000W   Bucket diameter: 55 gallons

Maximum operating temperature: 230 degrees

Pumping rate: Can be manually controlled (controlled) or controlled by external signal

Overcurrent protection: Yes

Leakage shut-off protection: Yes

1. An electromechanical equipment integrating temperature heating control, pressurization function, liquid transportation and extrusion coating functions.

2. The solid hot melt adhesive is heated in the bucket and quickly melts into a liquid state, gathering at the bottom of the pressure plate. When the operating temperature reaches the usage temperature, the motor starts and drives the gear pump to rotate. At this time, the hot melt adhesive is sucked into the pump and is pressurized and injected into the bifurcation seat (gumming plate), then flows through the filter device, insulation tube, hot melt adhesive gun body, and finally comes out from the spray nozzle to achieve the coating of hot melt adhesive. Under the precise control of the frequency converter, the motor speed is stable and can quickly track, making the output volume uniform and stable, especially suitable for quantitative coating applications.

Maximum processing width: 1300mm

Maximum processing height: T80mm

Maximum film roll diameter: ￠400mm

Minimum processing length: 500mm

Processing speed: 5 – 45m/min

Material feeding motor power: 2.2KW

Hot air box motor power: 0.75KW

Hot air box heating power: 7KW

Heating gun single branch power: 1.6KW

Rated voltage: 380V 50HZ

Mechanical weight: 3.5T

Overall dimensions: 4500mm * 2300mm * 2000mm