| Basic information |
| Mold provided by customer |
| Capacity: 150-200kg/h |
| Calcium : Customer decide |
| The output capacity varies with the materials and the operation conditions. |
| Line speed: 0.5 –2m/min
(The line speed varies with the thickness and operation condition) |
| The height of the centerline of the extruder: 1050mm |
| Operation direction: From right to Left |
| The color of the line: According to JWELL‘s standard |
Installation condition
| Power |
| Standard: 380V, 3-phase, 50HZ |
| Control voltage: 220V |
| Protection method: Earth connection |
| Compressed air |
| Pressure: 0.4~0.6Mpa |
| Cold water |
| Pressure:: 0.2~0.4Mpa |
| Temperature: 10 ~ 15℃ |
Detailed technical specification
| Conical Twin-screw Extruder | ||||||||
Screw& Barrel
|
| Dosing feeding system | |||
Adopter twin screw feeder
|
| Transmission system |
| High torque output |
| Thrust bearing domestic |
| Water cooling device |
| Gear material: 20CrMoTi |
| Combination of hard-toothed surface, nitriding gear grinding process |
| Adopting Germany technology, with a long service life, low noise and low heating |
| Motor directly connected to gearbox through coupling |
| Motor: Brook Crompton wolon or SIEMENS BEIDE AC other motor, 22kw |
| Main motor adjustment: by AC with imported huichuan brand |
| Center height: 1050mm |
| Weight of extruder: 3100kg |
| Optimized designed electric controlling cabinet-Meter controller from Japanese brand
Pressure sensor installed on the joint core of die head Grade of thermos-couple: Grade A AC inventor: huichuan brand Stopping device and alarming device |
| Prepare 6 heating zones for die |
| PID Temperature control |
| Emergency stop devices and alarm systems |
| Alarm system detection range |
Vacuum calibration table
| Vacuum pump：5.5KW*3 sets vacuum pump |
| Water pump ：4KW*1sets |
| Stainless steel：Tank material |
| Length：6000mm |
| width：1100mm |
| The center distance of aluminum guide rail ：320mm |
| Vacuum degree：0 -0.09 Mpa |
| Brand：Schneider and CHNT |
| Number of vacuum nozzles :32 |
| Number of faucets :32 |
| The position and method of the air and water nozzle joints:
The air nozzle is above the fuselage, and the water nozzle is on the square tube bracket of the sink |
| Air blower: Used to dry the surface water spots of products |
| The front and rear moving device :
Be connected by a screw rod. The power of the screw reduction motor is 0.75KW. |
| Adjustment of the upper and lower positions:
Electric lifting |
| Adjustment in other two directions:
Can be adjusted manually |
Haul off Unit
| Caterpillar: 2pcs |
| Clamping form :Pneumatic clamping |
| Effective track length:2000mm |
| Effective track width:240mm |
| Motor power:1.5KW*2 sets |
| Traction speed:0.5—2m/min |
| Working pressure of pneumatic components:0.5~0.7 Mpa |
| Mode：Manual cutting and automatic cutting modes. |
| Workbench displacement mode：Controlled by the cylinder. |
| Max：240mm/40mm |
| Cutting accuracy ：≤5mm |
| Cutting motor power：2.2KW |
| PLC：CTS PLC |
| Material：High quality alloy steel |
| Diameter：400mm |
| Working pressure：0.5~0.7 Mpa
Motor of dust collector: 0.75KW x 1 |
Stacker
| Form of stacker: Disassembled
Stacker products contact parts are covered by the rubber bloc |
| Tacking length:≤3000mm |
Crusher grinding machine
| Rotate knife diameter：500mm
Crusher inlet：1280mm Number of rotary knives：20 pcs Number of fixed knives：8 pcs Sieve plate aperture：￠12 Broken ability：400-600kg/h Motor power：55KW Crusher feeder:1.5kw Silo:1m3 Silo:1.5m3 feeder:1.5kw*2 Automatic weighing system |
| 660Mill
Motor power：90KW 12 holes for bag dust removal Circular vibrating screen 1.2 meters Suction fan7.5kw Shut-off machine 1.1KW |
Reviews
There are no reviews yet.